RAK tiles company : What are high performing tiles?

With its remarkable durability, adaptability, and aesthetic appeal, sintered stone has become an increasingly popular surface material in recent years. This is owing to the fact that it is an advanced surface material. In comparison to conventional materials like real stone, quartz, and porcelain, it possesses a multitude of advantages due to the implementation of cutting-edge sintering technology during its production. In the following guide, we will discuss what sintered stone is, how it is manufactured, the advantages it offers, the applications it may be used for, and how to properly care for it.

What exactly is the Sintered Stone?

Stone that has been sintered is a surface material that has been created and is made up of natural minerals that have been crushed under intense heat and pressure. The appearance of this procedure is similar to that of natural stone, which is developed over the course of thousands of years, but it is completed in a controlled atmosphere in just a few hours. The end result is a material that is resistant to ultraviolet light, non-porous, and extremely long-lasting. It may be used for a broad variety of applications, ranging from flooring and rak tiles company to cladding for exterior walls and furniture.

Is Porcelain Considered to Be the Same as Sintered Stone?

Sintered stone and porcelain are not exactly the same, despite the fact that they share some similarities. Sintered stone is subjected to higher pressure and more complex sintering procedures than natural stone, despite the fact that both are created from natural minerals and are processed at high temperatures. When compared to typical porcelain, this results in a material that is denser, stronger, and more resistant to heat, scratches, and impact than porcelain. Sintered stone is more adaptable than porcelain tiles, which are typically used for flooring and wall cladding. Sintered stone can be utilized for high-performance countertops, splashbacks, and outdoor surfaces. Porcelain tiles are commonly employed for these applications.

How is the Stone Made of Sintered Form?

There is a complex sintering process that is involved in the manufacturing of sintered stone. This process includes the following steps:

The selection of raw materials involves the careful selection of natural minerals like as quartz, feldspar, and silica. These minerals are selected for their endurance and to enhance their aesthetic features.

Using cutting-edge gear, the minerals are first mixed together, and then they are put through a process that involves applying an incredibly high level of pressure.

In the sintering process, the material that has been compressed is heated to temperatures that are higher than 1,200 degrees Celsius. This causes the particles to fuse together, which eliminates any porosity and increases the material's strength.

After the sintered stone slabs have cooled, they are next finished by being cut, polished, or given textures in accordance with the needs of the design.

In what ways does sintered stone work to your advantage?

Sintered stone is preferable to a wide variety of other surface materials due to its extensive range of advantages, which include the following:

Because of its strong resistance to scratches, impact, and general wear and tear, it is an excellent choice for commercial and residential settings that are frequently used by a large number of people.

Heat Resistance Sintered stone, in contrast to quartz and other manufactured stones, is able to withstand high temperatures without deteriorating, scorching, or warping.

Surface that is non-porous — Because the material does not absorb liquids, it is resistant to stains and has a high level of hygiene qualities.

requiring little to no upkeep In addition to requiring little maintenance, it is simple to clean with nothing more than a damp towel and a gentle detergent.

Sintered stone is resistant to ultraviolet radiation, which means that it does not decay or fade when exposed to sunshine. This makes it a good choice for applications that take place outside.

Environmentally Friendly – Sintered stone is an environmentally sustainable material because it is formed from natural minerals and does not require the use of resins or synthetic binders in its production.

How much does it cost to purchase sintered stone?

There are a number of elements that influence the price of sintered stone, including the brand, thickness, design, and the criteria for installation among others. When it comes to high-quality sintered stone surfaces, you may anticipate paying anywhere from three hundred to seven hundred pounds per square metre on average. It's possible that the price will go up if you have any custom designs, complicated edge profiles, or premium finishes. However, the long-term benefits and durability of this material make it a good investment, despite the fact that it is more expensive than certain traditional materials.

How Should Your Sintered Stone Be Cleaned and Maintained?

The fact that sintered stone is so simple to maintain is among the most significant benefits it offers. Important cleaning and maintenance advice is as follows:

When cleaning the surface on a daily basis, use a damp cloth and a gentle detergent to wipe it down in order to remove any dust, oil, or spills.

When it comes to removing stains, it is recommended to use a sponge that is not abrasive and a cleanser that is pH-neutral. Be careful not to use bleach or other harsh chemicals.

Avoid Using Abrasive Materials Despite the fact that sintered stone is extremely scratch-resistant, it is recommended that you use gentle cleaning pads rather than steel wool or hard scouring pads when cleaning it.

Avoid Impact Damage Despite the fact that sintered stone is extremely long-lasting, it is important to avoid dumping heavy things straight against the surface in order to eliminate the possibility of chipping.

Maintenance That Does Not Require Sealant Sintered stone, in contrast to real stone, does not need to be sealed, which makes it a low-maintenance alternative that is suitable for commercial and residential settings that are frequently used.

Is Dekton a Stone That Were Sintered?

It is true that Cosentino is the manufacturer of the well-known brand of sintered stone known as Dekton. A one-of-a-kind sintering process is utilized in the manufacturing of Dekton. This process blends cutting-edge technology with natural minerals in order to generate a surface that is both extremely compact and highly effective. As a result of its non-porous nature, its resilience to heat, and its longevity, Dekton is frequently utilized for the construction of kitchen worktops, flooring, cladding, and outdoor furniture.

The Uses of Sintered Stone in Applications

Because of its extraordinary versatility, sintered stone can be utilized in a wide variety of residential and commercial applications, including the following:

Worktops for the Kitchen – Because of its resistance to heat and scratches, it is an excellent option for areas that are used for food preparation.

Surfaces for Bathrooms Because of its resilience to water, sintered stone is an excellent material for use in bathroom vanities, showers and wall cladding.

Wall Cladding and Flooring — Because of its longevity, it enables installations of floor and wall cladding that are both seamless and stylish.

Outdoor Kitchens and Furniture - The ability of sintered stone to withstand ultraviolet light ensures that it will keep its appearance and functionality even when used in outdoor environments.

Surrounds for the Fireplace – Because of its resistance to heat, it is an excellent option for fireplace surrounds that is both safe and fashionable.

Final Thoughts

It is a novel material that combines the beauty of natural stone with the durability and low maintenance of engineered surfaces. Sintered stone is a material that combines these two characteristics. With its great performance and wide range of design possibilities, it may be utilized for a variety of applications, including kitchen worktops, bathroom vanities and external cladding respectively. It is a desirable investment for both homeowners and businesses because of its long lifespan, resilience to wear, and little maintenance requirements. Despite the fact that it may be a more expensive alternative, it is nevertheless a worthwhile investment. In the future, you will be able to take pleasure in the aesthetic and functional benefits of sintered stone if you have a thorough understanding of how to properly care for it.